Configure HWIC-1DSU-T1 for Qwest T1

Unanswered Question
Sep 2nd, 2010

Greetings.  I just got a 1921 and I will be connecting it to a T1 provided by Qwest in a few weeks.  I wanted to prepare for this deployment as much as possible.  They have not given me any public IP addresses yet.  Can someone take a look at the config snippet below and tell me if I am headed in the right direction?  Thank you.

Interface serial 0/0
service-module t1 clock source line
service-module t1 timeslots 1-24 speed 64
service-module t1 framing esf
service-module t1 linecode b8zs
ip address x.x.x.x
encapsulation ppp
no shut

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Thu, 09/02/2010 - 16:10

You likely will have external clock. Ask.

b8zs and esf are default.

common mask on ptp is /30

That's it.

Jan Santiago Thu, 09/02/2010 - 16:14

Yeah the second line should read "service-module t1 clock source line".


This Discussion