routing

Answered Question
Sep 2nd, 2010
User Badges:

My internal networks of 10.6.1.0 and 10.6.10.0 are unable to connect to the internet. Here is the config.


Am I missing a route?


Thanks.

Correct Answer by Nagaraja Thanthry about 6 years 6 months ago

Hello,


Under the interfaces, you have not enabled NAT.


interface FastEthernet0/0

description $ETH-WAN$

ip address aaa.bbb.ccc.212 255.255.255.248

ip nat outside -- Missing

duplex auto

speed auto

!

interface FastEthernet0/1

description Internal

ip address 10.6.1.251 255.255.255.0

ip nat inside -- Missing

duplex auto

speed auto

!


Hope this helps.


Regards,


NT

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Nagaraja Thanthry Thu, 09/02/2010 - 19:53
User Badges:
  • Cisco Employee,

Hello,


Under the interfaces, you have not enabled NAT.


interface FastEthernet0/0

description $ETH-WAN$

ip address aaa.bbb.ccc.212 255.255.255.248

ip nat outside -- Missing

duplex auto

speed auto

!

interface FastEthernet0/1

description Internal

ip address 10.6.1.251 255.255.255.0

ip nat inside -- Missing

duplex auto

speed auto

!


Hope this helps.


Regards,


NT

Actions

This Discussion