09-02-2010 07:31 PM - edited 03-04-2019 09:38 AM
My internal networks of 10.6.1.0 and 10.6.10.0 are unable to connect to the internet. Here is the config.
Am I missing a route?
Thanks.
Solved! Go to Solution.
09-02-2010 07:53 PM
Hello,
Under the interfaces, you have not enabled NAT.
interface FastEthernet0/0
description $ETH-WAN$
ip address aaa.bbb.ccc.212 255.255.255.248
ip nat outside -- Missing
duplex auto
speed auto
!
interface FastEthernet0/1
description Internal
ip address 10.6.1.251 255.255.255.0
ip nat inside -- Missing
duplex auto
speed auto
!
Hope this helps.
Regards,
NT
09-02-2010 07:53 PM
Hello,
Under the interfaces, you have not enabled NAT.
interface FastEthernet0/0
description $ETH-WAN$
ip address aaa.bbb.ccc.212 255.255.255.248
ip nat outside -- Missing
duplex auto
speed auto
!
interface FastEthernet0/1
description Internal
ip address 10.6.1.251 255.255.255.0
ip nat inside -- Missing
duplex auto
speed auto
!
Hope this helps.
Regards,
NT
09-02-2010 10:18 PM
Exactly. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide