09-02-2010 08:23 PM
Since ESW 500 Series firmware version 2.1.16 requires boot version 1.0.0.7 for 8-port ESW models and boot version 1.0.0.4 for 24-port and 48-port models, you may need to manually install or upgrade the boot code to ensure that the appropriate versions are used.
To download firmware and boot code files for ESW switches, go to www.cisco.com/go/esw500help, click the Resources tab, then click the Firmware link. A Cisco.com login is required.
Unable to find boot code at the listed URL.
Solved! Go to Solution.
09-02-2010 09:11 PM
Hi Brian,
I followed the link you mentioned, selected firmware and rummaged around and found the bootcode.
see my screenshot below.
regards Dave
09-02-2010 09:23 PM
Thanks Dave.
And remember to use the Browser interface to the switch to install new bootcode. CCA does not do boot code.
09-02-2010 09:11 PM
Hi Brian,
I followed the link you mentioned, selected firmware and rummaged around and found the bootcode.
see my screenshot below.
regards Dave
09-02-2010 09:23 PM
Thanks Dave.
And remember to use the Browser interface to the switch to install new bootcode. CCA does not do boot code.
09-03-2010 05:48 AM
Very odd, there must be a permission setting that prevents me from seeing the boot code.
09-03-2010 05:52 AM
I see, it's under the older code. Thanks!
09-03-2010 06:05 AM
Hi Brian,
Good stuff
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: