Can I use Catalyst 6504E slot2 for ethernet module or service module?

Answered Question
Sep 3rd, 2010

I am thinking composition of catalyst6504E.

can I use slot2 of catalyst6504E for ethernet module or service module?

cisco configuration tool answer OK.

But cisco power calclator point out me.

configuration tool

     WS-C6504-E
     Catalyst 6500 Enhanced 4-slot chassis,5RU,no PS,no Fan Tray
1
      S733AEK9-12233SXI
      Cisco CAT6000-SUP720 IOS ADVANCED ENTERPRISE SERVICES SSH
1
      WS-SUP720-3B
      Catalyst 6500/Cisco 7600 Supervisor 720 Fabric MSFC3 PFC3B
1
      CF-ADAPTER-SP
      SP adapter for SUP720 and SUP720-10G
1
      WS-SVC-FWM-1-K9
      Firewall blade for 6500 and 7600, VFW License Separate
1
      WS-X6748-GE-TX
      Cat6500 48-port 10/100/1000 GE Mod: fabric enabled, RJ-45
1
      WS-X6724-SFP
      Catalyst 6500 24-port GigE Mod: fabric-enabled (Req. SFPs)
1
      FAN-MOD-4HS
      High-Speed Fan Module for 7604/6504-E
1
      PWR-2700-AC/4
      2700W AC Power Supply for Cisco 7604/6504-E
2
      CAB-7513AC
      AC POWER CORD NORTH AMERICA (110V)
2

cisco power calclator

SlotLine CardOutput Current(@42V)
(A)
Output Power
(W)
Typical Power Used
(W)
Heat Dissipation
(BTU/Hr)
FAN2FAN-MOD-4HS1.4360.0648.05241.30
1WS-SUP720-3B6.72282.24225.791133.94
2WS-SVC-FWM-16.72282.24225.791133.94
3WS-X6724-SFP4.93207.06165.65831.89
4WS-X6148A-GE-TX2.50105.0084.00421.85
Output Current(@42V)
(A)
Output Power
(W)
Typical Power Used
(W)
Heat Dissipation
(BTU/Hr)
Total22.30936.60749.283762.93

Slot 2 is redundant supervisor-engine slot. It will allocate either the power of a supervisor engine or of the line card, whichever is greater. The Actual Output Current, Out Power and Heat Dissipation for your selected line card are 4.09A,171.78W,and 690.15 BTU/Hr

I have this problem too.
0 votes
Correct Answer by Jon Marshall about 3 years 7 months ago

As pointed out by Francisco you can use redudant slot for any module you like.

Jon

Correct Answer by francisco_1 about 3 years 7 months ago

According to the table above and as Jon stated yes you can.

Francisco

  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
Jon Marshall Fri, 09/03/2010 - 03:07

Not sure what you are asking. Both your outputs show that you can indeed use slot 2 for any module you want.

Perhaps you could clarify.

Jon

iotoiotoioto Fri, 09/03/2010 - 03:39

thanks, Jon.

sorry, I just saw "Slot 2 is redundant supervisor-engine slot. "

and my colleague say it's impossible.

so I asked.

did anyone use that composition?

francisco_1 Fri, 09/03/2010 - 03:43

Chassis

Supervisor Engine 32/ Supervisor Engine 720 Slots

Classic Line-Card Slots

Single Fabric Connected Line Cards

Dual Fabric Connected Line Cards

Cisco Catalyst 6503

1 and 2

2 and 3

2 and 3

WS-X67XX line cards not supported

Cisco Catalyst 6503-E

1 and 2

2 and 3

2 and 3

2 and 3

Cisco Catalyst 6504-E

1 and 2

2 thru 4

2 thru 4

2 thru 4

Cisco Catalyst 6506

5 and 6

1 through 6

1 through 6

1 through 6

Cisco Catalyst 6506-E

5 and 6

1 through 6

1 through 6

1 through 6

Cisco Catalyst 6509

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-E

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-NEB

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-NEB-A

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6513

7 and 8

1 through 13

1 through 13

9 through 13

Correct Answer
francisco_1 Fri, 09/03/2010 - 03:44

According to the table above and as Jon stated yes you can.

Francisco

Correct Answer
Jon Marshall Fri, 09/03/2010 - 03:47

As pointed out by Francisco you can use redudant slot for any module you like.

Jon

Actions

Login or Register to take actions

This Discussion

Posted September 3, 2010 at 3:00 AM
Stats:
Replies:6 Avg. Rating:5
Views:630 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 15,007
2 8,155
3 7,730
4 7,083
5 6,742
Rank Username Points
140
72
69
65
45