09-03-2010 04:30 AM - edited 03-06-2019 12:48 PM
Hello All -
We ran into the HSRP limit on our 3750s. Luckilly we just finished a data center with dual 4506s in them. We intend to start moving all the VLAN routing from the 3750s to the 4506s. I have searched but cannot find any reference to a HSRP limit on the WS-X45-SUP6-E Supervisor Engine. Is anyone aware of what if any is the HSRP limit on these sup engines?
Thanks
Mike.
Solved! Go to Solution.
09-03-2010 05:22 AM
Hi Mike,
The limitation is on software. With HSRP v1, the max number of group is 256. With HSRP v2, you don't have that limitation. HSRP V2 is supported on 12.2(52)SG.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html
Hope that helps.
Regards,
Lei Tian
09-03-2010 05:22 AM
Hi Mike,
The limitation is on software. With HSRP v1, the max number of group is 256. With HSRP v2, you don't have that limitation. HSRP V2 is supported on 12.2(52)SG.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html
Hope that helps.
Regards,
Lei Tian
09-03-2010 06:44 AM
Thank you!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: