got BIP connection from ISP, with block of public ip's (100.100.100.1/30)
PE: 220.127.116.11 /30
CE: 18.104.22.168 /30
there is server on the LAN side which I want to be accessed via public IP 100.100.100.2
how can i go about setting this using just 1 box (do not want to involve firewall for NAT , just 1 router - cisco 1841 )
topology and most important config in attachments...
now, PE and CE ip's are pingabe fine from net
server can be accessed from outside (via telnet for example no problem)
ISP is advertising routes to 22.214.171.124 and 100.100.100.1/30 via PE (80.80.808.1)
the issue is trace to my public IP (100.100.100.2)...it hits PE then CE ..then goes back to PE then to CE...then again back to PE then CE ..etc....
I think i need to put some route to 100.100.100.1/30 in my config ...is that right ?