09-06-2010 06:08 PM - edited 03-21-2019 02:57 AM
We have 4 SPA 504Gs on our network of 1qty SPA9000 / 1qty SPA400 and they are not showing up when when we do the Auto Config with the Wizard. We also have WIP310 that show up just fine. I have the SPA 504G working but had to configure them manually. I would just like to know why they are not showing up in the Configuration Wizard.
Solved! Go to Solution.
09-07-2010 08:42 AM
Hi,
Are the phones running the latest firmware? (7.4.6) Also do you have the latest Wizard version (beta)? See:
https://supportforums.cisco.com/docs/DOC-9876
Also, see this older post:
09-07-2010 08:42 AM
Hi,
Are the phones running the latest firmware? (7.4.6) Also do you have the latest Wizard version (beta)? See:
https://supportforums.cisco.com/docs/DOC-9876
Also, see this older post:
09-07-2010 12:15 PM
Yeah, thanks for the Beta Link that is all that was required.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide