cGVRP and cisco 7609

Unanswered Question
Sep 7th, 2010
User Badges:

Hi,


I'm trying to setup cGVRP on 7609 (IOS Version 12.2(33)SRD3)


All looks fine, but according to statistics switch doesn't send any GVRP messages. ;(

All needed output below:




sh gvrp summary

GVRP global state           : enabled

GVRP VLAN creation          : enabled

VLANs created via GVRP      : none

MAC learning auto provision : enabled

Learning disabled on VLANs  : none

==============
sh run int gi 1/35
Building configuration...
Current configuration : 137 bytes
!
interface GigabitEthernet1/35
description kalin29k5-sw1
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
end
===============
sh gvrp interface gigabitEthernet 1/35
Port      Status    Mode            Registrar State
Gi1/35    on        fast compact    normal
Port      Transmit Timeout   Leave Timeout   Leaveall Timeout
Gi1/35    200                600             10000
Port      Vlans Declared
Gi1/35    1-11,13-15,17,21-23,25,30-35,500-501,505-506,1000-1001,2001-2049,2052-2147,3000-3004,4000,4094
Port      Vlans Registered
Gi1/35    none
Port      Vlans Registered and in Spanning Tree Forwarding State
Gi1/35    none
=======================
sh gvrp interface gi 1/35 statistics
pak_rcvd                : 0
pak_leaveall_rcvd       : 0
pak_rcvd_dropped        : 0
pak_rcvd_malformed      : 0
pak_xmitted             : 0
pak_leaveall_xmitted    : 0
pak_xmit_failed         : 0
leaveall_expired        : 0
justkidding_expired     : 0
leave_expired           : 0
leave_delayed           : 0
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion