simultaneous usage of both external & internal DHCP servers on one controller

Answered Question
Sep 8th, 2010

Hello,

I have a WLC controller configured to use external DHCP server. Is it possible to use an internal DHCP server for another pool (external network) on a different physical interface, dynamic interface etc?

Thanks in advance

I have this problem too.
0 votes
Correct Answer by Surendra BG about 6 years 4 months ago

create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..

Regards

Surendra

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Surendra BG Fri, 09/17/2010 - 00:35

create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..

Regards

Surendra

davy.timmermans Fri, 09/17/2010 - 02:53

if you want to use an external server: fill in the external DHCP IP in at the corresponding interface

if you want to use an internal server: fill in the management IP of the WLC

;-)

Mariya Telitsina Fri, 09/17/2010 - 03:16

the thing was about using them both at the same time )

have already cleared that out. thanks.

Actions

This Discussion

 

 

Trending Topics - Security & Network