09-08-2010 02:17 AM - edited 07-03-2021 07:09 PM
Hello,
I have a WLC controller configured to use external DHCP server. Is it possible to use an internal DHCP server for another pool (external network) on a different physical interface, dynamic interface etc?
Thanks in advance
Solved! Go to Solution.
09-17-2010 12:35 AM
create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..
Regards
Surendra
09-17-2010 12:35 AM
create a SVI on the switch and configure the corresponding internal pool on the WLC.. this will do it.... make sure we are mapping the WLANs correctly..
Regards
Surendra
09-17-2010 03:15 AM
yup, have already done this...
everything is working fine.
Thanks for reply.
09-17-2010 02:53 AM
if you want to use an external server: fill in the external DHCP IP in at the corresponding interface
if you want to use an internal server: fill in the management IP of the WLC
;-)
09-17-2010 03:16 AM
the thing was about using them both at the same time )
have already cleared that out. thanks.
09-19-2010 05:35 AM
Just as a follow up. Here is the Cisco document for "DHCP with the WLC"
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080af5d13.shtml#DHCP-Proxy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide