In the example below can I apply one main # to follow this path? So
all calls coming into 555 555-1000 would ring button 1, then they
would softkey to get to the 2nd and 3rd call on button one, then the call goes to button 2 etc?
> Overlaid Ephone-dns with Rollover Buttons: Example The following
> example configures a "3x3" shared-line setup for three ephones and
> nine shared lines (ephone-dns 20 to 28). Each ephone has a unique
> ephone-dn for each of its three buttons (ephone-dns 11 to 13 on ephone
> 1, ephone-dns 14 to 16 on ephone 2, and ephone-dns 17 to 19 on ephone
> 3). The rest of the ephone-dns are shared among the three phones.
> Three phones with three buttons each can take nine calls. The overflow
> buttons provide the ability for an incoming call to ring on the first
> available button on each phone.
>
> ephone-dn 11
>
> number 2011
>
>
>
> ephone-dn 12
>
> number 2012
>
>
>
> ephone-dn 13
>
> number 2013
>
>
>
> ephone-dn 14
>
> number 2014
>
> .
>
> .
>
> .
>
> ephone-dn 28
>
> number 2028
>
>
>
> ephone 1
>
> button 1o11,12,13,20,21,22,23,24,25,26,27,28 2x1 3x1
>
>
>
> ephone 2
>
> button 1o14,15,16,20,21,22,23,24,25,26,27,28 2x1 3x1
>
>
>
> ephone 3
>
> button 1o17,18,19,20,21,22,23,24,25,26,27,28 2x1 3x1