09-08-2010 02:44 PM - edited 03-16-2019 12:41 AM
Currently I have the a inbound translation pattern which translates the called number from 10 to 6. Translation profile which is applied as imcoming to the pots dial peer is .
I need to block a few numbers based on originating ANI. I have made new translation rules to reject the numbers, and they do work.
Can I have a translate called, and a translate calling on the same profile / dial peer.
Voice translation-rule 12
rule 1 /41625\(.....\)/ /1\1/
Voice translation-rule 13
rule 1 reject /^(10 digit number)/
Voice translation-profile XXXX
translate calling 13
translate called 12
Is this possible? Thanks
Solved! Go to Solution.
09-08-2010 03:02 PM
You can have translate called and calling directives on the same translation
profile. Though, I think that when you are doing a call rejection this
configuration approach doesn't apply. I block calls using the "call-block"
command under the pots dial-peer. This is evaluated independently of a
translation. Or at least that is my understanding.
HTH.
Regards,
Bill
On 9/8/10 5:44 PM, "balitewiczp"
Please remember to rate helpful responses and identify
09-08-2010 03:02 PM
You can have translate called and calling directives on the same translation
profile. Though, I think that when you are doing a call rejection this
configuration approach doesn't apply. I block calls using the "call-block"
command under the pots dial-peer. This is evaluated independently of a
translation. Or at least that is my understanding.
HTH.
Regards,
Bill
On 9/8/10 5:44 PM, "balitewiczp"
Please remember to rate helpful responses and identify
09-09-2010 06:36 AM
Thanks for the info and quick response. Using called blocking command worked very nicely.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: