Nexus 7010 Loses Config after power off

Unanswered Question
Sep 8th, 2010
User Badges:

Recently we installed a pair of Nexus 7010's and we recently moved them to an APC rack better suited for their size. Upon powering them up we found out that the VDC's lost their configurations. The VDC's and the alloated resources were still there as well as the default VDC configuration but the other 2 we have configured had their configurations missing. We have been observing best practices and saving the configuration to NVRAM with the copy run start comand as well as the copy run start vdc-all commands yet the configurations were still lost.


Can anyone shed some light on what the problem may be?


Thank you in advance for your help!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
clyded Tue, 05/10/2011 - 21:01
User Badges:

We had the same issue TAC told us to reset the supv
,,,,, you might want to save your config ;-)  it worked for us

Actions

This Discussion

 

 

Trending Topics: Other DC Subjects