Site to site VPN is not working btwn PIX 506 and ASSA 5505

Unanswered Question
Sep 9th, 2010

These are not wroking for me. Please help

Setting on PIX 506:--

access-list 101 permit ip

sysopt connection permit-ipsec
crypto ipsec transform-set itsuport esp-des esp-md5-hmac
crypto map transam 1 ipsec-isakmp
crypto map transam 1 match address 102
crypto map transam 1 set peer x.x.x.x
crypto map transam 1 set transform-set itsuport

crypto map transam interface outside
isakmp enable outside
isakmp key IT5ngr13v address x.x.x.x netmask
isakmp identity address
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 1
isakmp policy 1 lifetime 1000


Amardeep Rana

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mirober2 Thu, 09/09/2010 - 06:00

Hi Amardeep,

I see that your crypto map is configured to match ACL 102, but the ACL you posted is 101--was that just a typo?

Also, can you post the configuration on the ASA side as well?



This Discussion