09-09-2010 08:33 AM - edited 03-06-2019 12:54 PM
Hi,
I have a question, Does the new switch 2960-S support GLC-T module in the uplink SFP slot?
I find in the data sheet the following:
Cisco Catalyst 2960-S and 2960 with SFP-based ports:
• 1000BASE-T SFP-based ports**: RJ-45 connectors, 4-pair Category 5 UTP cabling
** 1000BASE-T not supported on Cisco Catalyst 2960-S switches.
Please, I need confirmation.....
Thanks
Regards
09-09-2010 03:28 PM
Yes it does. I have a few installed.
09-09-2010 04:53 PM
GLC-T is supported on the 2960S. Check the link below (Table 1-2)
10-14-2010 11:30 AM
Vijay - could you please verify that the GLC-T is supported? There are multiple conflicting documents. I have also found conflicts in the Netformx tool where just two weeks ago the GLC-T was a selectable option and could be verified where today it is not? Both the MLC and CT do not have this option to select the SFPs.
As it stands - i would have to order these as seperate items.
Thanks, Steve
10-14-2010 03:45 PM
I can confirm it works because I have several 2960S-24PD that have GLC-T in them.
10-15-2010 07:51 AM
I can confirm that it works and that cisco DOES NOT support this, see also the thread i started about this an hour ago.
Cisco gave us the message that it might work but that they DO NOT support this, so whatever problem you get in a config that has these SFP, you risk to get no support.
Wim Holemans
Network Services
University of Antwerp
10-15-2010 08:03 AM
Hi,
I made the question, the respond of the Cisco Systems Engineers,is the following:
"Yes, the GLC-T is supported on the 2960S. The data sheet hasn’t been updated. However, the hardware installation guide does list the GLC-T. Here is the list of supported 2960S models for the GLC-T SFP:
Catalyst 2960S-48FPS-L
Catalyst 2960S-48LPS-L
Catalyst 2960S-24PS-L
Catalyst 2960S-48TS-L
Catalyst 2960S-24TS-L
Catalyst 2960S-48TS-S
Catalyst 2960S-24TS-S "
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: