Unsigned IOS images ??

GREGORY GEE · ‎09-09-2010

I installed a new IOS load on my 2951 and but it failed to boot with the following error.

IOS Image Load Test

___________________

Unsigned Image Found, bailing out

Signature DID NOT VERIFY

boot: cannot load "flash0:"

Is there something wrong with c2951-universalk9-mz.SPA.151-2.T1.bin? Or is there additional steps with the 2951 that I haven't learned about yet. This is my first 2900.

Thanks,

Greg

vragotha · ‎09-09-2010

Please post the complete boot log.

Try breaking into ROMMON and post a 'dir flash:' and 'set'

vragotha · ‎09-09-2010

The IOS may also be corrupt. May want to try downloading a fresh copy off cisco.com and reloading it on the flash

Ivanpomidorov · ‎05-20-2013

I am have such problem. Have you resolved it?

Leo Laohoo · ‎05-21-2013

Have you resolved it?

Post the entire bootup process of your router.

Also post the output to the command "dir flash:"

Ivanpomidorov · ‎05-22-2013

bootup process:

System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB

CISCO2901/K9 platform with 524288 Kbytes of main memory

Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC enabled

Readonly ROMMON initialized

program load complete, entry point: 0x80803000, size: 0x1b340

IOS Image Load Test

___________________

Signature did not verify

Signature DID NOT VERIFY

boot: cannot load "flash0:"

System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB

CISCO2901/K9 platform with 524288 Kbytes of main memory

Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC enabled

Readonly ROMMON initialized

Compact Flash1: Not present

System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB

CISCO2901/K9 platform with 524288 Kbytes of main memory

Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC enabled

Readonly ROMMON initialized

program load complete, entry point: 0x80803000, size: 0x1b340

IOS Image Load Test

___________________

Signature did not verify

Signature DID NOT VERIFY

boot: cannot load "flash0:"

System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB

CISCO2901/K9 platform with 524288 Kbytes of main memory

Main memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC enabled

Readonly ROMMON initialized

rommon 42 > dir flash0:

program load complete, entry point: 0x80803000, size: 0x1b340

Directory of flash0:

2 82005760 -rw- c2900-universalk9_npe-mz.SPA.152-2.T1.bin

Leo Laohoo · ‎05-22-2013

Download the IOS again from the Cisco website.

Eject the CF from the router and use a multi-card reader to overwrite the file.

Subeh Sharma · ‎05-22-2013

Hi,

As you can see from the logs you pasted the image is corrupted:

Signature did not verifySignature DID NOT VERIFYboot: cannot load "flash0:"

As the post above suggest, download the image again and use this link to check for any corruption in the image:

http://www.cisco.com/web/about/security/intelligence/iosimage.html

Regards
Subeh

Sent from Cisco Technical Support iPhone App

Lappian0815 · ‎01-31-2014

Hi,

I have a similar problem as GREGORY GEE!

my Router 2951 is not booting the Image:

###***###

Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.3(3)M, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 22-Jul-13 04:58 by prod_rel_team

: Unexpected exception to CPU: vector 300, PC = 0x4338994 , LR = 0x4338990

-Traceback= 0x4338994z 0x4006DB4z 0x42DED9Cz 0x42DED9Cz 0x4006E70z 0x42ED9F4z 0x42F3EC8z 0x59410A8z 0x5941410z 0x4E32070z 0x4E193B8z

M8500 CPU Register Context:
PC   = 0x04338994 MSR = 0x02029200 CR   = 0x24008042 LR    = 0x04338990
CTR = 0x04E1EEF0 XER = 0x00000000 DEAR = 0x042EDA00 PVR   = 0x80210030
DEC = 0x00002E5C TBU = 0x00000000 TBL = 0x1C70116B
DBCR0= 0x41000000 DBCR1= 0x00000000 DBCR2= 0x00000000
IAC1 = 0x00000000 IAC2 = 0x00000000 DAC2 = 0x00000000 DAC2 = 0x00000000
R0   = 0x8009FA00 R1   = 0x017A5BF0 R2   = 0x75FFF7BF R3    = 0x10935A80
R4   = 0x0C56E914 R5   = 0x00000000 R6   = 0x05A2BD68 R7    = 0x00000000
R8   = 0x00000002 R9   = 0x10930000 R10 = 0x017A5B48 R11   = 0x00000000
R12 = 0x44008082 R13 = 0x9D31D183 R14 = 0x11820000 R15   = 0x00000002
R16 = 0x0000FFFF R17 = 0x11830000 R18 = 0x100000A4 R19   = 0x11DD59A0
R20 = 0x11DD229C R21 = 0x00000000 R22 = 0x11DD5C54 R23   = 0x1C700336
R24 = 0x1003A49C R25 = 0x1183E5D0 R26 = 0x11820000 R27   = 0x00000004
R28 = 0x00000002 R29 = 0x042EDA00 R30 = 0x00000000 R31   = 0x042EDA00
TEXT_START : 0x040001A0
DATA_START : 0x0C000000Invalid path _20060102-000004-UTC
No fault history 0x0

=== Flushing messages () ===

Buffered messages:
Queued messages:
*Jan 2 00:00:06.923: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Jan 2 00:00:02.543: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted
*Jan 2 00:00:02.587: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2951 Next reboot level = ipbasek9 and License = ipbasek9
*Jan 2 00:00:02.663: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2951 Next reboot level = securityk9 and License = securityk9
*Jan 2 00:00:02.735: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2951 Next reboot level = uck9 and License = uck9
*Jan 2 00:00:04.579: %MAINBOARD-4-ECC_SINGLE: A corrected single bit error has occurred in DRAM at location 0x42EDA0
*** System received a SegV exception ***
signal= 0xb, code= 0x300, context= 0x119c2108
PC = 0x4338994, Vector = 0x300, SP = 0x17a5bf0

System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.

Total memory size = 1024 MB - DIMM0 = 1024 MB, DIMM1 = 0 MB
CISCO2951/K9 platform with 1048576 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled

Readonly ROMMON initialized
program load complete, entry point: 0x4000000, size: 0x18fa0
open(): Open Error = -13
loadprog: error - on file open
boot: cannot load "flash:c2951-universalk9-mz.SPA.152-1.T.bin"

System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.

Total memory size = 1024 MB - DIMM0 = 1024 MB, DIMM1 = 0 MB
CISCO2951/K9 platform with 1048576 Kbytes of main memory
Main memory is configured to 72/0(dimm 0/1) bit mode with ECC enabled

Readonly ROMMON initialized
program load complete, entry point: 0x4000000, size: 0x18fa0
program load complete, entry point: 0x4000000, size: 0x18fa0

###***###

I have deleted the Image "c2951-universalk9-mz.SPA.152-1.T.bin" on the Flash

and load up the new Image "c2951-universalk9-mz.SPA.153-3.M.bin", but the Router

don´t leave the Booting Process and end in a Booting-Loop.

Please help

Thanks

Andi