Trouble Calling Italy from the UK

Unanswered Question

I have an issue calling to Italy from the UK.  I have a router with PRI and can place calls to the US and other countries.  When i call Italy, i get a message that states: "the # u have dialed is not recognised"

When I call the same number from a PRI in the US, the call goes through just fine.  I have pasted the debugs for the bad call and the good one.  Any help would be appreciated.

GOOD CALL PLACED FROM US PRI TO ITALY

*Sep 10 12:24:52.169: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0868

Sending Complete

Bearer Capability i = 0x8090A2

Standard = CCITT

Transer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98396

Exclusive, Channel 22

Facility i = 0x9FAA06800100820100A117020100020100800F4D616C636F6C6D2054797272656C6C

Calling Party Number i = 0x0081, '1753603034'

Plan:Unknown, Type:Unknown

Called Party Number i = 0xA1, '9011390773615209'

Plan:ISDN, Type:National

*Sep 10 12:24:52.217: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8868

Channel ID i = 0xA98396

Exclusive, Channel 22

*Sep 10 12:24:54.389: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = 0x8868

Progress Ind i = 0x8088 - In-band info or appropriate now available

*Sep 10 12:24:54.933: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x0868

Cause i = 0x8090 - Normal call clearing

*Sep 10 12:24:54.961: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x8868

*Sep 10 12:24:54.977: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0868

CALL FAILS PLACED FROM UK-LANGLEY PRI TO ITALY

-

get message "the # u have dialed is not recognised"

Sep 10 17:06:37 CEST: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x005D

Sending Complete

Bearer Capability i = 0x9090A3

Standard = CCITT

Transfer Capability = 3.1kHz Audio

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA9838E

Exclusive, Channel 14

Calling Party Number i = 0x0081, '1753603034'

Plan:Unknown, Type:Unknown

Called Party Number i = 0xA1, '00390773615209'

Plan:ISDN, Type:National

Sep 10 17:06:38 CEST: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x805D

Channel ID i = 0xA9838E

Exclusive, Channel 14

Sep 10 17:06:38 CEST: ISDN Se0/0/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x805D

Progress Ind i = 0x8482 - Destination address is non-ISDN

-------

GBLAVG01(config-if)#do sh voice call summary | inc 0/0/0

0/0/0:15.1 - - -

0/0/0:15.2 - - -

0/0/0:15.3 - - -

0/0/0:15.4 - - -

0/0/0:15.5 - - -

0/0/0:15.6 - - -

0/0/0:15.7 - - -

0/0/0:15.8 - - -

0/0/0:15.9 - - -

0/0/0:15.10 - - -

0/0/0:15.11 - - -

0/0/0:15.12 - - -

0/0/0:15.13 - - -

0/0/0:15.14 - - -

0/0/0:15.15 g729br8 n S_CONNECT

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content