09-10-2010 09:46 AM - edited 02-21-2020 04:50 PM
Hello,
We just purchased a pair of ASA5510 with ASA-SSL-25, but when I do 'sh ver' I see :
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
0: Ext: Ethernet0/0 : address is 5475.d0c3.95ba, irq 9
1: Ext: Ethernet0/1 : address is 5475.d0c3.95bb, irq 9
2: Ext: Ethernet0/2 : address is 5475.d0c3.95bc, irq 9
3: Ext: Ethernet0/3 : address is 5475.d0c3.95bd, irq 9
4: Ext: Management0/0 : address is 5475.d0c3.95b9, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
How can I verify that we did got the SSL-25 licence?
Thanks!
Solved! Go to Solution.
10-07-2010 12:50 PM
Please rate my post if it helped. Thanks, man.
09-10-2010 10:09 AM
Did you apply the license key? Here's how:
http://www.networkstraining.com/how-to-upgrade-cisco-asa-firewall-license/
Please rate this post if it helps.
Verify your license afterwards. You should see 25 SSL VPN Peers then.
10-07-2010 10:27 AM
That was it! The vendor who sold the license reported similar issues reported by other customer.
Installing the new licenses fixed the issue.
Thanks for all your help!
10-07-2010 12:50 PM
Please rate my post if it helped. Thanks, man.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: