09-10-2010 09:46 AM - edited 02-21-2020 04:50 PM
Hello,
We just purchased a pair of ASA5510 with ASA-SSL-25, but when I do 'sh ver' I see :
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
0: Ext: Ethernet0/0 : address is 5475.d0c3.95ba, irq 9
1: Ext: Ethernet0/1 : address is 5475.d0c3.95bb, irq 9
2: Ext: Ethernet0/2 : address is 5475.d0c3.95bc, irq 9
3: Ext: Ethernet0/3 : address is 5475.d0c3.95bd, irq 9
4: Ext: Management0/0 : address is 5475.d0c3.95b9, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
How can I verify that we did got the SSL-25 licence?
Thanks!
Solved! Go to Solution.
10-07-2010 12:50 PM
Please rate my post if it helped. Thanks, man.
09-10-2010 10:09 AM
Did you apply the license key? Here's how:
http://www.networkstraining.com/how-to-upgrade-cisco-asa-firewall-license/
Please rate this post if it helps.
Verify your license afterwards. You should see 25 SSL VPN Peers then.
10-07-2010 10:27 AM
That was it! The vendor who sold the license reported similar issues reported by other customer.
Installing the new licenses fixed the issue.
Thanks for all your help!
10-07-2010 12:50 PM
Please rate my post if it helped. Thanks, man.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide