09-10-2010 10:02 AM - edited 03-21-2019 02:59 AM
All,
I have configured the UC540 FXS with 2 user and 2 fax type extensions.
All the FXS ports can call the IP Sets.
However whenever an IP Set or Analog set tries to call an Analog set I just get a busy tone.
Nothing can call my analog sets.
I'm guessing I'm missing something in the config.
I'd appreciate any pointers.
Thanks
Chris
09-10-2010 11:33 AM
Hi Chris,
Did you use TSW (Telephpony Setup Wizard) to configure FXS analog stations?
Did you configure them as User Mode?
What extensions did you assign them?
Steve
09-10-2010 02:12 PM
Here's the current config:
Port Role Sig Ext
0/0/0 User LS 221
0/0/1 FAX LS 222
0/0/2 User LS 223
0/0/3 User LS 224
Thanks
Chris
09-10-2010 06:50 PM
Ok, now check to see that there is one, and only one ephone-dn for each user mode analog phone.
If you have more that one, we need to remove one.
09-13-2010 07:52 PM
how did this end up?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: