09-13-2010 02:48 AM - edited 03-16-2019 12:44 AM
The expansion module 7916 is not working for some reason.
I have a CCMe 7.1 and the IOS version is 12.4(24).
The below configuration is done but without any luck:
tftp-server flash:B016-1-0-4.SBN
!
telephony-service
load 7916-24 B016-1-0-4.SBN
!
ephone 1
no multicast-moh
mac-address 6416.8DBB.9CE4
type 7965 addon 1 7916-24
button 1:1
!
Any suggestion will be highly appreciated.
09-13-2010 02:59 AM
I have the same problem.
The 7965 must have firmware 8-3-5 or a later version.
So, you upload the firmware and then:
tftp-server flash:jar45sccp.8-4-1-23.sbn
tftp-server flash:SCCP45.8-4-2S.loads
tftp-server flash:term65.default.loads
tftp-server flash:apps45.8-4-1-23.sbn
tftp-server flash:cnu45.8-4-1-23.sbn
tftp-server flash:cvm45sccp.8-4-1-23.sbn
tftp-server flash:dsp45.8-4-1-23.sbn
telephone-service
load 7965 SCCP45.8-4-2S
09-13-2010 03:18 AM
i cant find the files for CCMe 7.1 on the cisco website any links that help in this will be highly appreciated
09-13-2010 03:26 AM
download software --> ip telephone --> li phones --> cisco unified ip phone 7900 series --> cisco unified ip phone 7965G --> Skinny Client Control Protocol (SCCP) software --> and then from all releases you select one for example the 8.4.1
and you download the cmterm-7945_7965-sccp.8-4-1.zip
hope this helps
09-21-2010 06:04 AM
I have tried but still without any luck.
Is there anything else that i can try to get it working.
Thank you and waiting for your reply.
09-21-2010 09:14 AM
Hi
The load command should not have .sbn on the end of it; the tftp-server command should.
Regards
Aaron
Please rate helpful posts..
09-21-2010 09:16 AM
The load should be specified as: SCCP45.8-4-2S
Make sure you have no extension listed in the configuration under telephony-service, however when listing in tftp, you need it.
--Matt
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: