Hi,
Whenever we apply the signature update to IPS 4215, it reboot itself normal but gives an error after enter the
username/pasword by using ssh; and not enter the CLI.
"Error: Cannot communicate with mainApp (getVersion). Please contact your system administrator.
Would you like to run cidDump?[no]: "
After rebooting the IPS by power off/power on, it works normal, we enter CLI.
So we could not apply the signature update from IPS-sig-S487-req-E4.pkg to IPS-sig-S511-req-E4.pkg.
IPS# sh ver
Application Partition:
Cisco Intrusion Prevention System, Version 6.0(6)E4
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S511.0 2010-08-31
OS Version: 2.4.30-IDS-smp-bigphys
Platform: IDS-4215-4FE-K9
Serial Number: 88810221721
Licensed, expires: 20-Jun-2011 UTC
Sensor up-time is 17 min.
Using 378331136 out of 510341120 bytes of available memory (74% usage)
application-data is using 41.6M out of 166.8M bytes of available disk space (26% usage)
boot is using 37.6M out of 68.6M bytes of available disk space (58% usage)
application-log is using 532.3M out of 2.8G bytes of available disk space (20% usage)
MainApp N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07-15T01:15:08-0500 Running
AnalysisEngine NE-NUBRA_E4_2010_MAR_24_22_44_6_0_6 (Ipsbuild) 2010-03-24T22:47:53-0500 Running
CLI N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07-15T01:15:08-0500
Upgrade History:
IPS-sig-S487-req-E4.pkg 11:06:09 UTC Sun May 02 2010
Recovery Partition Version 1.1 - 6.0(6)E3
although when i tried to update the signature agian after the reboot, it gave me the following error:
Error: execUpgradeSoftware : Update IPS-sig-S511-req-E4.pkg is already installed on this system
Any advice about this problem?
Thanks in advance.
