03-11-2009 12:17 AM - edited 03-17-2019 09:40 PM
Dears,
i have VIC2-2FXS installed on C2801.
the first port is not working.
the second is not working.i replaced the VIC but problem still exsists.
ext,2628 works / ext,2627 not work.
attached debug output.
03-11-2009 08:32 AM
How many wires are used in the cable that goes from port 1 to telephone? Please make sure that only two are present.
03-11-2009 07:44 PM
If you switch the device in the first port to the second port do you get the same result?
-nick
03-12-2009 06:27 AM
Yes, also i configured another extension such as 2629 but also the same problem exsists.
04-01-2009 11:16 AM
Is this gateway a H.323 or a MGCP gateway? If it is MGCP verify that the port registers and that it is a MGCP end point "show mgcp endpoint".
04-01-2009 11:31 AM
Dear all,
the problem solved by changing the cable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide