09-13-2010 06:27 AM - edited 03-06-2019 12:56 PM
Hi,
We would like to connect a 10Gb X2 and a TwinGig X2 to the same Supervisor (WS-X45-SUP6-E) is this possible. The release note are a little vague.
thanks
Andreas
09-13-2010 10:37 AM
Hi Andreas,
According to the datasheet you can do 10Gig or 1Gig (using the TwinGig) on either slot. So yes, you should be able to do 1 10Gig and 2 1Gigs.
Here is more info:
HTH
Reza
09-13-2010 11:46 AM
Hi Reza,
Thanks for the reply.
I also have that datasheet but there seems to be conflicting documents if you see below:
This says there is a limitation.
So im having trouble to to clarify this and i dont have the equipment to test this.
thanks
Andreas
09-13-2010 12:16 PM
Hi Andreas,
After reading the link you posted, it seems that you can only do 10Gigs or 1Gigs and not a mix of both, but than again to be sure, it needs to be test it.
Thanks,
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide