Solved: Making a routed switch virutal interface the default SVI

Joshua Engels · ‎09-13-2010

I am having an issue where I am adding a catalyst switch to my ACS server for AAA authentication.

I have a catalyst with the following:

inteface vlan 174

ip address 192.168.174.1

interface vlan 199

ip address 192.168.199.1

When I setup the switch in the ACS, the ACS rejects it because it sees the traffic coming from a different SVI 2. I would like to set it up on SVI 174. My question is, how do I make the traffic source out of SVI 174?

Thanks,
Josh

Nagaraja Thanthry · ‎09-13-2010

Hello,

Can you try "ip tacacs source-interface "vlan id"" and see if that helps?

Regards,

NT

View solution in original post

Nagaraja Thanthry · ‎09-13-2010

Hello,

Can you try "ip tacacs source-interface "vlan id"" and see if that helps?

Regards,

NT

Joshua Engels · ‎09-13-2010

That worked. Thanks a lot!