Solved: IOS Upgrade on Catalyst 3750

manuelsch · ‎09-13-2010

Hi,

I tried to install a new ios, but the boot process was interrupted:

Boot:

Loading "flash:/c3750-ipservicesk9-mz.122-55.SE.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@.....@

Error loading "flash:/c3750-ipservicesk9-mz.122-55.SE.bin"

#verify flash:/c3750-ipservicesk9-mz.122-55.SE.bin
Verified flash:/c3750-ipservicesk9-mz.122-55.SE.bin

#sho boot
BOOT path-list      : flash:/c3750-ipservicesk9-mz.122-55.SE.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :

#sho flash:

Directory of flash:/

    2 -rwx        1618   Mar 1 1993 01:19:32 +01:00 config.text
    3 drwx         192   Mar 1 1993 01:08:06 +01:00 c3750-ipservices-mz.122-35
.SE5
507 -rwx        1048   Mar 1 1993 01:19:32 +01:00 multiple-fs
508 -rwx         556   Mar 1 1993 01:00:44 +01:00 vlan.dat
510 -rwx     5472256   Mar 1 1993 01:11:50 +01:00 c3750-ipservicesk9-mz.122-
52.SE.bin
511 -rwx          57   Mar 1 1993 01:19:32 +01:00 private-config.text

15998976 bytes total (13824 bytes free)

is it possible, that there is not enought space?

What happends if i delete the old file ( c3750-ipservices-mz.122-35.SE5) and it won't work?

Can i restore this file in the "debug" modus?

Thanks for your help.

with friendly greetings,

Manuel

Leo Laohoo · ‎09-13-2010

Firstly, you'll need to delete the old IOS using the command "delete /f /r flash:c3750-ipservices-mz.122-35.SE5".

Next, if this is a one-and-only switch then you can copy the IOS into this switch using the command "archive download-sw tftp:///.tar".

Hope this helps and don't forget to rate our useful posts. Thanks.

View solution in original post

Leo Laohoo · ‎09-13-2010

Firstly, you'll need to delete the old IOS using the command "delete /f /r flash:c3750-ipservices-mz.122-35.SE5".

Next, if this is a one-and-only switch then you can copy the IOS into this switch using the command "archive download-sw tftp:///.tar".

Hope this helps and don't forget to rate our useful posts. Thanks.

manuelsch · ‎09-13-2010

Thanks for your fast answer.

But im not 100% sure if it works.

Because i haven't got a Tar file, only the bin file.

I will add the boot ios with the command Boot system flash .

What can i do if the switch can't boot?

How can i restore the old ios in the worst case?

Leo Laohoo · ‎09-14-2010

If that's the case, copy the .bin file using the command "copy tftp: flash:".