cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
592
Views
5
Helpful
4
Replies

Standard config of lan switches

jorge.s
Level 1
Level 1
4 Replies 4

Edison Ortiz
Hall of Fame
Hall of Fame

Looks pretty good. You've adopted most, if not all, best practice on switch config.

Couple of things you may want to add:

1) ACL on the SNMP community

2) ACL on the VTY lines

Also, you don't need a password entry under VTY once you enable aaa-new model.

Same goes for enable secret and enable password.

informatiza
Level 1
Level 1

I need help

I need information to describe the result of the show interface fastethernet

chris_tan
Level 1
Level 1

Some add-on:-

1.You do not need "enable password" if you already have "enable secret".

2.If you need to manage this switch, you might need to assign ip on vlan1 or loopback0

3.You need to have a "spanning-tree portfast" command on each ports which connected to client. DO NOT apply this command to interface connected to router or another switch

Hope it help on your Standard doc. :-)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: