cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3312
Views
0
Helpful
3
Replies

ME 3400 and VTP

narainarun
Level 1
Level 1

Hi All,

We purchased ME 3400 switch and trying to implement it. But its quite surprising in the ME3400 configuration guide that the switch does not support VTP. When I checked in Feature navigator under feature "VTP" i could see ME3400 supports VTP. But when i get into CLI of ME3400, i am not getting any option of configuring VTP. I could see in some sites VMPS is supported in ME3400.

I would like to confirm the following:

1. Does VTP support present in ME3400 or not? If not, what would be the reason that it is not included in ME3400.

2. If not what is the alternative.

Network is already running VTP of around 30 switches.

thanks

Arun

3 Replies 3

burleyman
Level 8
Level 8

Arun,

VTP is not supported on the ME 3400, not sure why.

Here is a link that might help in figuring out what you could do.

http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_55_se/configuration/guide/ME3400_scg.html

Mike

Hello,

The most interesting is that in feature navigator VTP2 appears as supported feature.

FN is wrong unfortunately.

My suggestion is to consider it as the last source of info. You should to prefer release notes, data sheets and configuration guides first.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco