Aaron Harrison Tue, 09/14/2010 - 11:41
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


lots of steps, which vary depending which products (gateways/phones etc) you have. Read the security guide for starters:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/4_1_3/sec413.html


While you are reading that, you also need to order 2 KEY-CCM-ADMIN-K9 security keys to enable the cluster for 'mixed mode' security. No keys, no encryption.


Regards


Aaron


Please rate helpful posts...

ricardorojas123 Tue, 09/14/2010 - 13:38
User Badges:

To encrypt the calls between two IP phones just enough to set the value Device Security Mode to Encrypted?

Jaime Valencia Tue, 09/14/2010 - 17:15
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

After you go thru the whole process of creating the CTL file and using the 2 USB keys, getting the file to the phones... yes.


If you mean if you can just go right now and try to change it without the USB tokens and creating the CTL file, then no.

The whole process is outlined in the link Aaron posted, have you gone thru it?


HTH


java


If this helps, please rate


www.cisco.com/go/pdihelpdesk

Actions

This Discussion