IOS upgrade on 2801 failure

moonviewingjp · ‎09-14-2010

As usual , I copy tftp : flash: to copy IOS on Cisco2801 but failed.

Connection between Fe0/0 interface and PC is stable, 100Mbps Full link is up.

I am not sure why Connection time out during copy.

Flash free space is enogh for new IOS.

Please let me know resolusion.

yourname#copy tftp: flash:
Address or name of remote host [10.10.10.2]?
Source filename [n]? c2801-spservicesk9-mz.124-24.T3.bin
Destination filename [c2801-spservicesk9-mz.124-24.T3.bin]?
Accessing tftp://10.10.10.2/c2801-spservicesk9-mz.124-24.T3.bin...
Loading c2801-spservicesk9-mz.124-24.T3.bin from 10.10.10.2 (via FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!... [timed out]

%Error reading tftp://10.10.10.2/c2801-spservicesk9-mz.124-24.T3.bin (Connection timed out)

Leo Laohoo · ‎09-14-2010

Is this router located remotely or locally?

moonviewingjp · ‎09-14-2010

locally.

I put on my pc on the Cisco2801.

Connection is very simple like following.

Cisco2801 and PC (windowsXP) are connecting via Ethernet cable.

10.10.10.1 (2801 Fe0/0) ---------10.10.10.2 (PC )

I turn off XP firewall, and I can ping between 10.10.10.1 and 10.10.10.2. Link is up with 100Mbps.

please let me know why time out.

Leo Laohoo · ‎09-15-2010

Are you using TFTP32?

moonviewingjp · ‎09-15-2010

I am using TFTPD for windowsNT/2000/XP2003 version1.01.

It is similar TFTPD32 program.

Leo Laohoo · ‎09-15-2010

Please use TFTP32.

peterw123456 · ‎09-15-2010

Change another TFTP software and try again.

moonviewingjp · ‎09-16-2010

I used tftpd32 and it worked well. it completed upload.

So far I had used TFTPD for windowsNT/2000/XP2003 version1.01.and no problem.

I am not sure this is compatibility problem between ios and tftpd softwear problem.

Leo Laohoo · ‎09-16-2010

TFTPD32 is recommended by Cisco because it has a good reputation of handling large files.

If your issue has been resolved, please don't forget to mark this thread as "Answered". Thanks.