09-14-2010 01:02 PM - edited 03-16-2019 12:46 AM
I have as ATA 168. It is from V+++. Sw ver V3.2.0
I have the DCHP url from VIR. It appears not to be password locked.
I enter it in the browser it says not found.
I cannot look at the config menu.
I tried 3 browsers - even turned off the FW.
Has to be something simple?
Any advice? I have read all the ATA 186 posts
Thanks
09-14-2010 01:06 PM
Assuming u mean ATA186.
Can u ping ATA's IP (as learnt from IVR menu?) from the PC you are trying to http to ?
Please see following doc and try assigning it a static IP via IVR menu preferably on the
same subnet as the PC you have and try http again:
HTH,
DK
09-14-2010 01:13 PM
Sorry about the model number - yes 186 ATA
Yes can ping the url.
Will give the IVR static IP assign
Thanks
09-14-2010 01:19 PM
OK it appears it password locked. I cannot change the IP adr.
Tried the password reset no luck.
Guess I cannot use this for another VOIP service.
I will read more about the password rest, but I think I am at a loss.
Looks like V has won one
09-14-2010 01:27 PM
Password research follow-up . Appears from what I read and what I have tried to program, I cannot use this ATA on any other VOIP network.. NO way to reset the password or the config
Thanks
09-14-2010 01:45 PM
Tried factory reset ?
Step 1 Press the function button on the Cisco ATA.
Step 2 Press the digits 322873738 (FACTRESET) then press # on your telephone keypad.
Step 3 Press 3 on your telephone keypad to confirm that you want to reset the Cisco ATA, then hang up the phone.
09-14-2010 04:22 PM
Yes did that. It keeps asking for the password.. nope it is locked by V. I will try to contact them for the password. I closed the acct years ago. I want to try another VOIP service - cheaper but do not want to invest in another ATA
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: