09-15-2010 04:39 AM - edited 03-06-2019 12:59 PM
hi
I have above problem with cat3750 switch?
configuration is :
interface FastEthernet1/0/1
switchport access vlan 100
swtchport mode access
srr-queue bandwidth shre 10 10 60 20
priority-queue out
mls qos trust dscp
auto qos voip trust
spqnning-tree portfast
spanning-tree bpduguard enable
the speed lower than 384k seems ok.
Could anyone advice me if the queueing will cause such problem? if not, in network side, is anything else can couse this problem?
any comments will be appreciated
thanks in advance
julxu
09-15-2010 04:52 AM
Hi julxu,
Disable 'mls qos', and see if the video conference still has the problem. If it still has probelm, then it is not problem on queueing setting.
any rating will be appreciated
HTH,
Lei Tian
05-02-2018 12:49 AM
in the doc it shows what it configures when you apply that specific command ,it also applies video with af41 you can see exactly what way too so it does cover video in multi conf queue
test it on a port , it will roll it out globally and only apply it to that port , if your not happy with it you can easily remove it and try something like trust dscp which will cover anything that's marking at its source and queue it
Just so you know this is how you see its carrying marking before even applying qos
#sh platform qos dscp-cos counters gigabitEthernet 1/0/1 | i DSCP46
Ingress DSCP46 1505533580 0
Egress DSCP46 1814798695 0.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: