11-11-2008 10:53 AM - edited 03-11-2019 07:11 AM
I'm getting the error continously for a couple of my hosts on the inside trying to access hosts on a DMZ. For hosts starting connections on the inside to the DMZ, I'm using an access-list. I'm having trouble figuring out what is going on.
Solved! Go to Solution.
11-12-2008 01:24 AM
Hello Sean,
Try this
static (externaldmz,inside) 192.168.151.0 192.168.151.0 netmask 255.255.255.0
Regards
11-12-2008 01:24 AM
Hello Sean,
Try this
static (externaldmz,inside) 192.168.151.0 192.168.151.0 netmask 255.255.255.0
Regards
11-12-2008 02:13 AM
Hi ..
by looking at your config you probably need to add those hosts you are talking about to the access-list nonat. For instance if the inside host having the issue is x.x.x.x then your entry should look like this
access-list nonat permit ip host x.x.x.x host
Please rate helpful posts !!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: