09-15-2010 07:52 PM - edited 03-04-2019 09:47 AM
Having a syntax issue, not sure about it.
#sh version
ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)
System image file is "flash0:c2951-universalk9-mz.SPA.150-1.M3.bin"
ip sla monitor 1
brings back 'invalid input'... so "ip sla ?" only gives
"key-chain" and "responder" as options...
Also:
track 1 rtr 1 reachability
brings back 'invalid input'.... "track 1 ?" gives
"interface" "ip" "list" "stub-object"
I'm trying to create an sla monitor for failover.
track 1 rtr 1 reachability
delay down 15 up 10
!
ip sla monitor 1
type echo protocol ipIcmpEcho 1.1.1.1 source-interface ethernet0
timeout 1000
threshold 40
frequency 3
!
ip sla monitor schedule 1 life forever start-time now
Something like that....
It's a brand new 2951.
Any ideas?
Solved! Go to Solution.
09-15-2010 07:57 PM
Hi,
Check the license from your 'show ver' output; IP SLA requires data license package.You need to buy the data license to active the feature. You can use the evaluation license to test, but eventually you need the license to active the feature.
http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1097675
Regards,
Lei Tian
09-15-2010 07:57 PM
Hi,
Check the license from your 'show ver' output; IP SLA requires data license package.You need to buy the data license to active the feature. You can use the evaluation license to test, but eventually you need the license to active the feature.
http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1097675
Regards,
Lei Tian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: