Anyconnect with SBL not working

Unanswered Question
Sep 16th, 2010
User Badges:

I am trying to get the SBL to work for Windows XP/Vista/7 using an ASA5510 running 8.2 (1). When I login to the WebVPN, it installs the anyconnect client and SBL components,  and copies the xml profile. When I reboot, I get nothing popping up (on an XP machine) before login...any ideas? I have included below my config for the webvpn...I also worked with TAC and they could not find the problem either. Any help you can give me is appreciated.

enable outside
svc image disk0:/anyconnect-win-2.5.0217-k9.pkg 1
svc profiles profile1 disk0:/AnyConnect.xml
svc enable
group-policy WebVPNPolicy internal
group-policy WebVPNPolicy attributes
wins-server value
dns-server value
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value WebVPNACL
  svc modules value vpngina
  svc profiles value profile1

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
slawford Sun, 09/19/2010 - 23:37
User Badges:
  • Cisco Employee,


Could you please confirm:



bchewning Mon, 09/20/2010 - 08:21
User Badges:

Thanks for the reply! I actually did not change anything and it is working this morning. This leads me to believe it was a PC issue. Thanks for the reply!


This Discussion

Related Content