users complain the wireless connect often break off and then auto connect again

Unanswered Question
Sep 16th, 2010
User Badges:

The wireless network use 2100 controller run 4.2.205.0 and 1242G APs.

In 2100 controller's trap log ,there are several APs display messages as the below:

122 Thu Sep 16 14:07:25 2010 Coverage hole cleared for Base Radio MAC: 00:3a:98:36:e4:50 and slotNo: 0

123 Thu Sep 16 14:04:25 2010 Coverage Hole Detected for AP AP9caf.ca01.c890 whose Base Radio MAC is 00:3a:98:36:e4:50. Number of Failing Clients 1

180 Thu Sep 16 12:16:32 2010 Coverage hole cleared for Base Radio MAC: 00:3a:98:36:e4:40 and slotNo: 0 
181 Thu Sep 16 12:13:32 2010 Coverage Hole Detected for AP AP9caf.ca01.c88e whose Base Radio MAC is 00:3a:98:36:e4:40. Number of Failing Clients 1

Hope someone can help me what happen,Thank!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Thu, 09/16/2010 - 20:11
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Sounds like low wireless signal to me.  When the user is connected, what is the RSSI from the WLC side?

lzcong_78 Thu, 09/16/2010 - 21:45
User Badges:

I use my notebook with wirelessMon to survey,the RSSI is between -50dbm and -70dbm.

Vinay Sharma Sun, 09/25/2011 - 10:58
User Badges:
  • Gold, 750 points or more

Hello Zhicong,



Please mark the Question as Answered, if the provided information by VIP Leo is correct and it helped. By doing that others can take benefit as well.



Thanks,


Vinay Sharma

Community Manager – Wireless

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode