Configuring VWIC-1MFT-E1 on 2821 router for E1 R2 from Ericsson MD110 exchange

Unanswered Question
Sep 17th, 2010
User Badges:


We need to configure the VWIC module on 2821 router to convert the E1 R2(CAS) coming from MD110 exchange into IP. Can someone please share the configuration.

The problem is we don't have access to the exchange so can not get specific information about the E1 R2. The settings will be default on the exchange.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Felipe Garrido Fri, 09/17/2010 - 06:14
User Badges:
  • Cisco Employee,

Configuring the router will be very difficult without any information on how the E1 R2 circuit needs to be provisioned. You'll basically be shooting in the dark when it comes to the country specific info. I also don't see any info on E1 R2 installations with this type of PBX on the interop website. I would advise that you first get the info on the E1 R2 before proceeding any further.



This Discussion