Server 2008SP2 raid controller driver for UCS C200M1?

Unanswered Question
Sep 17th, 2010
User Badges:
  • Bronze, 100 points or more

Since Windows 2008 is a couple years old, it doesn't have a built in raid controller driver for UCS C200M1 servers.  Windows did not discover the RAID controller in the server, and none of the drivers I've downloaded from Cisco appear to be correct.

Setting this up for Cisco Secure ACS 4.2(1), thought maybe someone here had played with some UCS C-Series gear...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
David McFarland Fri, 09/17/2010 - 11:08
User Badges:
  • Cisco Employee,


You didn't mention which raid controller you have in the C200.

If it's the on board ICH10R this document may help out

If this is the case, once you've configured BIOS and the ICH10R lun, you'll need to load the storage driver. It's under the Intel folder in the drivers IOS for storage. Reason? Its included in Intel's chip set even though it's labeled LSI.


This Discussion

Related Content