cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
0
Helpful
2
Replies

Constant RingBack heard with calls over PSTN SIP are XFERed from UC

mmertens
Level 1
Level 1

   I have a CUCM 7.1(3) and Unity Connection 7 deployment with two PSTN connections, 1 SIP and 1 PRI. When calls come in over SIP to an AA, and someone selects an option to XFER to a CUCM Hunt Pilot, the caller on the PSTN hears constant RingBack. The phone(s) in the Hunt Pilot's LG ring normally and all other call processing appears normal. If I call a DID on the PRI which is pointed to the same AA, and XFER to the same Hunt Pilot, Ring back is normal. Normal rining is also heard when I call the AA from the inside and Xfer.

   Also, If I change the UC AutoAttendants XFER to Supervised Transfer, the caller on the PSTN hears one ring back and then silence.

Any ideas? It does seem SIP related.

THANKS!

1 Accepted Solution

Accepted Solutions

Joseph Martini
Cisco Employee
Cisco Employee

Found exactly like: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth05703 this only happens with blind transferes not supervised as you've already seen.

View solution in original post

2 Replies 2

Joseph Martini
Cisco Employee
Cisco Employee

Found exactly like: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth05703 this only happens with blind transferes not supervised as you've already seen.

That was it!!!! Thanks Joe!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: