ADM(Anomaly Dectector Module) PowerDown Failure in upgrade process.

Unanswered Question
Sep 19th, 2010

hellow, everyone.

i'm yunchouljung in korea

i have a question about ADM module power down issue.

i had upgraded AGM Module successfully in version 6.1.2 to 6.1.6

but failed ADM Module upgrade in version 6.1.2 to 6.1.6

i uploaded a AP images in MP status and enterd "hw-module module 12 reset cf:4" command.

(i waited a message "you can now reset the module....")

after a reset process, ADM module disabled by SCP dnld Failure.

so, i enabled a power on ADM Module but result is same.

my upgrade process is below.

1.     hw-module module 12 reset cf:1

2.     copy ftp:[email protected]/c6svc-adm1G-k9.6-1-6.bin pclc#12-fs:

3.     hw-module module 12 reset cf:4

anybody help me?

thanks in advance.

p.s : i have already tested other ios version and ap/mp images.

================================================================

the module version and log is below.

Router_OUT#sh module

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  2    3  Anomaly Guard Module                   WS-SVC-AGM-1-K9   

  3   16  16 port 1000mb GBIC ethernet           WS-X6416-GBIC     

  5   48  SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX    

  7    2  Supervisor Engine 720 (Active)         WS-SUP720-3B      

  9    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE     

10    8  Network Analysis Module                WS-SVC-NAM-2      

12    3  Anomaly Detector Module                WS-SVC-ADM-1-K9   

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  2  0017.e067.ec6c to 0017.e067.ec73   2.0   7.2(1)       6.1(6)       Ok

  3  000e.d73c.3d40 to 000e.d73c.3d4f   2.5   5.4(2)       8.5(0.46)RFW Ok

  5  0015.2bfe.c130 to 0015.2bfe.c15f  10.1   7.2(1)       8.5(0.46)RFW Ok

  7  0016.c85e.3aa0 to 0016.c85e.3aa3   5.2   8.4(2)       12.2(18)SXF1 Ok

  9  001b.d45d.f890 to 001b.d45d.f893   2.6   12.2(14r)S5  12.2(18)SXF1 Ok

10  0003.fead.7592 to 0003.fead.7599   2.0   7.2(1)       4.0(1)       Ok

12  0012.80f1.1ae8 to 0012.80f1.1aef   1.0   7.2(1)       8.5(0.46)RFW PwrDown

Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  7  Policy Feature Card 3       WS-F6K-PFC3B       SAL10478K1R  2.3    Ok

  7  MSFC3 Daughterboard         WS-SUP720          SAL104892TJ  2.5    Ok

  9  Centralized Forwarding Card WS-F6700-CFC       SAL1124QX44  3.1    Ok

Mod  Online Diag Status

---- -------------------

  2  Pass

  3  Pass

  5  Pass

  7  Pass

  9  Pass

10  Pass

12  Not Applicable

Router_OUT#

47w1d: SP: The PC in slot 2 is shutting down. Please wait ...

47w1d: SP: shutdown_pc_process:No response from module 2

Jul 13 16:54:49: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)

47w1d: SP: OS_BOOT_STATUS(2) MP OS Boot Status: finished booting

Jul 13 16:56:50: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...

Jul 13 16:56:57: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.

Jul 13 16:56:57: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics

Jul 13 16:56:57: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online

Jul 13 16:56:58: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks

Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has started>

Jul 13 17:32:23: %SVCLC-SP-5-STRRECVD: mod 2: <Do not reset the module till upgrade completes!!>

Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <Application upgrade has succeeded>

Jul 13 17:42:11: %SVCLC-SP-5-STRRECVD: mod 2: <You can now reset the module>

47w1d: SP: The PC in slot 2 is shutting down. Please wait ...

47w1d: SP: PC shutdown completed for module 2

Jul 13 17:42:57: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)

47w1d: SP: OS_BOOT_STATUS(2) Anomaly Guard OS Boot Status: finished booting

Jul 13 17:45:03: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...

Jul 13 17:45:06: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.

Jul 13 17:45:06: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics

Jul 13 17:45:06: %OIR-SP-6-INSCARD: Card inserted in slot 2, interfaces are now online

Jul 13 17:45:07: %SVCLC-5-FWTRUNK: Firewalled VLANs configured on trunks

47w1d: SP: The PC in slot 12 is shutting down. Please wait ...

47w1d: SP: shutdown_pc_process:No response from module 12

Jul 13 17:53:29: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)

47w1d: SP: OS_BOOT_STATUS(12) MP OS Boot Status: finished booting

Jul 13 17:55:30: %DIAG-SP-6-RUN_MINIMUM: Module 12: Running Minimal Diagnostics...

Jul 13 17:55:37: %MLS_RATE-4-DISABLING: The Layer2 Rate Limiters have been disabled.

Jul 13 17:55:36: %DIAG-SP-6-DIAG_OK: Module 12: Passed Online Diagnostics

Jul 13 17:55:37: %OIR-SP-6-INSCARD: Card inserted in slot 12, interfaces are now online

Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has started>

Jul 13 18:26:27: %SVCLC-SP-5-STRRECVD: mod 12: <Do not reset the module till upgrade completes!!>

Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <Application upgrade has succeeded>

Jul 13 18:37:05: %SVCLC-SP-5-STRRECVD: mod 12: <You can now reset the module>

47w1d: SP: The PC in slot 12 is shutting down. Please wait ...

47w1d: SP: PC shutdown completed for module 12

Jul 13 18:38:35: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Reset)

Jul 13 18:46:04: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module  Failed SCP dnld)

Jul 13 18:53:54: %OIR-SP-6-REMCARD: Card removed from slot 12, interfaces disabled

Jul 13 19:01:28: %C6KPWR-SP-4-DISABLED: power to module in slot 12 set off (Module  Failed SCP dnld)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content