VG248-envmon

Answered Question
Sep 19th, 2010

Hi,

I am getting on vg248

"391 07:07:16    9m W EnvMon     3.3 volts supply too low: 3.053 volts", constantly.

Any idea how to troubleshoot this.. version on device are

Version
------------------------------------------------
Software version : 1.3(2)
DSP firmware version : 3.6(25C)
Loader version : 1.0(1)

I have this problem too.
0 votes
Correct Answer by Steven Holl about 6 years 4 months ago

That's a hardware bug (CSCse83429).  You either need to remove some devices off the VG224 so that the low voltage rail has less off a load on it, or you need to open a TAC SR to get it replaced with a unit that has the low voltage rail tweaked for more of a load.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Steven Holl Mon, 09/20/2010 - 07:55

That's a hardware bug (CSCse83429).  You either need to remove some devices off the VG224 so that the low voltage rail has less off a load on it, or you need to open a TAC SR to get it replaced with a unit that has the low voltage rail tweaked for more of a load.

Actions

This Discussion