CME: Extension mobility

Unanswered Question

Dear all

We used CME 7.1 with c2800nm-spservicesk9-mz.124-24.T1.bin on 2851 box , connected via a E1 to PSTN.

We have a major problem with the extension when it is not logged, when an external call is made to this extension the signaling sent by CME is recognized as "the number dialed does not exist". Please your guideline is required.

Best regards


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Felipe Garrido Tue, 09/21/2010 - 11:08

Can you collect the following debugs for a call which demonstrates the problem.

debug vpm signal

debug isdn q931

debug voip ccapi inout

Please note the calling and called party numbers.


gustavo_hahn Mon, 09/27/2010 - 07:12

Hi Felipe

debug 01 extension A:
Time: 14:44
Source: 24139033
Destination: 8284451
Time: 14:47
Source: 81080971
Destination: 8284451

debug 02 extension B:
Time: 14:52
Source: 24139033
Destination: 8284453
Time: 14:53
Source: 81080971

Destination: 8284453

Thanks for helpme

Felipe Garrido Mon, 09/27/2010 - 07:33

Do you want the calls to go to voicemail or do you just want the message played to the calling party to be different?


gustavo_hahn Mon, 09/27/2010 - 10:21

Hi Felipe

I need the phone just to ring or the call to be re-directed to pilot..

Salu2 y gracias


antonio.fragoso Wed, 09/29/2010 - 10:10

Hi Gustavo

You have a nice solution.

I am implementing it but users complies that ist not god to have two number when they are calling internaly , I means when they are loged at the distination apear one number ( user - profile ) , and when they are not loged apears other number ( logout profile ) .

You have this situation too ?

Concerning you question , I am using call forward to an pilot hunt group sucess



This Discussion

Related Content