cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
615
Views
0
Helpful
5
Replies

Does anyone one know what is this ISDN error mean?

victorchen
Level 1
Level 1

.Sep 21 10:18:37.209 AEST: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8  callref = 0x80D8

.Sep 21 10:18:46.489 AEST: ISDN Se0/0/0:15 Q931: TX -> CONNECT pd = 8  callref = 0x80D8

.Sep 21 10:18:46.509 AEST: ISDN Se0/0/0:15 Q931: RX <- CONNECT_ACK pd = 8  callref = 0x00D8

.Sep 21 10:18:46.509 AEST: ISDN Se0/0/0:15 **ERROR**: call_progress: DEV_CONNECTED VOICE ERROR: Bearer capability not available(0x3A): b channel 4 call id 0xEDF

1 Accepted Solution

Accepted Solutions

I believe that the voice quality issues may be unrelated, however I believe you're hitting defect CSCse55246.  This defect is resolved in 12.4(11)T2 as well as all the latest 12.4(15)T releases.

If this upgrade doesn't resolve your issue than you may wish to open a TAC SR and an engineer should be able to assist you further.

--Matt

View solution in original post

5 Replies 5

Matthew Kaufman
Cisco Employee
Cisco Employee

This could be related to a known defect in IOS.  What version are you running?  Can you provide a 'show ver'?

--Matt

40000158-S04-R01-AdshelMelbourne#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(11)T, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Sat 18-Nov-06 17:16 by prod_rel_team

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

40000158-S04-R01-AdshelMelbourne uptime is 11 weeks, 6 days, 20 hours, 58 minutes
System returned to ROM by reload at 14:34:39 AEST Tue Jun 29 2010
System restarted at 14:35:57 AEST Tue Jun 29 2010
System image file is "flash:c2800nm-advipservicesk9-mz.124-11.T.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.51) with 247808K/14336K bytes of memory.
Processor board ID FHK1018F1B5
2 FastEthernet interfaces
11 Serial interfaces
1 ATM interface
1 terminal line
1 Channelized E1/PRI port
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
2 Voice E & M interfaces
1 cisco service engine(s)
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Are you encountering any call issues, or just is it just the error you describe?

--Matt

only when people make internation call to NZ  has voice qulity issue.

I believe that the voice quality issues may be unrelated, however I believe you're hitting defect CSCse55246.  This defect is resolved in 12.4(11)T2 as well as all the latest 12.4(15)T releases.

If this upgrade doesn't resolve your issue than you may wish to open a TAC SR and an engineer should be able to assist you further.

--Matt

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: