Solved: One command for IP addresses and descriptions

sebastian.lemke · ‎09-21-2010

Hello all,

most of us use the following commands very often:

"show ip interface brief"

"show interface description"

Is there any command, which show interface IP addresses and descriptions?

Can I combine these commands somehow?

Regards

Jennifer Halim · ‎09-21-2010

This command might be something you are looking for:

sh interface | i line protocol|Internet address|Description

Hope that helps.

View solution in original post

Jennifer Halim · ‎09-21-2010

This command might be something you are looking for:

sh interface | i line protocol|Internet address|Description

Hope that helps.

sebastian.lemke · ‎09-21-2010

ahh, that's it, thanks a lot!

It's not as neat as the output of the other commands, but it works.

I didn't know, that you can combine the "| include" filters... Do you have a website, where this is documented?

Jennifer Halim · ‎09-21-2010

I don't think we have a documentation that includes that specifically, however, I believe it uses the normal regular expression symbols for multiple matches.

sebastian.lemke · ‎09-21-2010

FYI: http://www.cisco.com/en/US/docs/ios/12_2/termserv/configuration/guide/tcfaapre_ps1835_TSD_Products_Configuration_Guide_Chapter.html

Here is the shortest form of the obove command:

sh int | i e p|t a|pt