Configuring BLF on a SPA525G connected to CUCM

Unanswered Question
Sep 21st, 2010
User Badges:

Hi there,




I have a SPA525G connected to our CUCM and registered fine as a SIP device, I can assign speed dials to the spare line keys fine but configuring BLF is proving to be a challenge!


Basically under the phone tab of the SPA525G's web interface I have picked a spare line, disabled the extension, set the share call appearance to private and entered the following syntax into the extended function field:


fnc=blf+sd+cp;[email protected];[email protected]


When this is applied the line key button is a solid orange colour, the speed dial function works fine but not the BLF feature. I believe the solid orange light denotes that the phone has failed to subscribe?


Any pointers would be much appreciated.


Thanks,


Keith

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion