P2P link issue between WIC-1DSU-T1-V2 & WIC-1DSU-56K4

Unanswered Question
Sep 21st, 2010
User Badges:
Hi ,

I would require suggestions on the below setup for a point to point connectivity;
- With the topology in below setup: 2811 (serialx/y/z)<==Clear T1 circuit===>TELCO Cloud<==56k====>(Serialx/y)2691

WIC-1DSU-T1-V2 (is in 2800) - is non-channelized one, and WIC-1DSU-56K4(is in 2600) being channelized card .

With the above hardware I see the link not coming up, I understand that the above hardware resources would not bring up the cicruit.
As the card in 2811 is non channelized card adn at the other end channelized one, and the query here is do we have any methods to make this setup work, I mean do the telco have any options of tuning their end configs to make this setup work.

Or Does 2811 have any other channelized cards that can support this setup withoout any intervention of the telco.

would appreciate quick inputs, thanks

Regards
Jameel
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content