LMS 3.2. Error in Job

j-fragoso · ‎09-21-2010

hello,

We get this error when this job run.

Device	Commands

X.X.X.X	set cam notification enable set snmp trap enable macnotification set cam notification added enable Gi1/0/8 set cam notification removed enable Gi1/0/8 set cam notification added enable Gi1/0/10

[…]

*** Device Details for X.X.X.X ***

Protocol ==> Unknown / Not Applicable

Selected Protocols with order ==> SSH,Telnet

Execution Result:

CM0107 Import the config file to PRIMARY Running Config on device failed Cause: CM0070 Copy Config to device failed on X.X.X.X Cause: TELNET: Failed to establish TELNET connection to X.X.X.X - Cause: Connection refused.

Action: Check device credentials and reachability.

CM0089 Config archival successful for X.X.X.X

This is the credentials verification report.

Credential Verification report as on Sep 08 2010 17:02:16 CEST							Run now
Device Name	Read Community	Read Write Community	SNMPV3	Telnet	Enable by Telnet	SSH	Enable by SSH
X.X.X.X	OK	Failed	No Value To Test	Failed	Did Not Try	OK(Primary Successful)	OK(Primary Successful)

What can be the problem?

Thanks

Joe Clarke · ‎09-21-2010

There is not enough information here to determine the root cause. You would need to provide debug logs to determine the cause of the failure. Since SSH appears to be working, it could be that these commands return an error code. If you cannot provide the logs here, open a TAC service request and attach the logs for this job.