Converting an AP to LWAPP using WCS

Unanswered Question
Sep 21st, 2010

HI,

I am trying to migrate from an AP via the WCS and handed me the following log


START: Detailed logging started at -> 09.21.2010_19.12.09

INFO: TELNET to device 172.16.53.103 done.
INFO: Privilege level is equal to 15.
INFO: Setting vty line completed.
INFO: Dumped Environmental variables.
INFO: AP is supported for Upgrade process
INFO: IOS version is greater than or equal to 12.3(7)JA.
INFO: AP has MIC installed already.
INFO: Station role is root.
INFO: DNS and Domain name configured.
INFO: Mac address of device is 00:23:33:97:74:62
INFO: Completed Dot11Radio0 shutting.
INFO: Device set up done and time configured on device.
INFO: Run-config dumped.
INFO:  Gateway 172.16.53.1
INFO: Hostname HotelC4
INFO: Dumped Environmental variables.
INFO: Starts loading recovery image, takes time based on link speed.
ERROR: Device Response :: examining image...
%Error opening  (Permission denied)archive download: takes 0 seconds
ERROR: Image Loading FAILURE.
INFO: Un-shut radio 1 done.

END: Migration Process Failure: Image Loading Failure.

The AP is a 1121 and I have the IOS file-C1100-rcvk9w8 tar.124-21a.JA2

tftp server field put the ip address of my PC

in the field file path  C:/

in the field file   C1100-rcvk9w8 tar.124-21a.JA2

please help need to know that I'm doing wrong step

regards

AD

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
adinamarca Wed, 09/22/2010 - 07:06

Estimate, has the following characteristics AP1121

00:23:33:97:74:62
172.16.53.103 802.11b/gUnassignedN/A0EnabledN/AUpOK


Versions
Software Version12.3(8)JEB

Inventory Information
AP TypeAutonomous
AP ModelAIR-AP1121G-A-K9
H-REAP Mode SupportedNo

Unique Device Identifier (UDI)
NameAP1100
DescriptionCisco Aironet 1100 Series (IEEE 802.11g) Access Point
Product IdAIR-AP1121G-A-K9
Version IdV04
Serial NumberFTX1315V08Q


regards

Actions

This Discussion