Check if a DDI number is reaching the gateway

Answered Question
Sep 22nd, 2010
User Badges:

Hi,


We have a problem with some DDI's just getting a dead tone when we call them. I'm fairly certain it is a problem at the telecom companies end but wanted to be sure. Is there a command I can use to view live calls hitting the gateway? I basically want to try dialling the numbers in question and see whether or not they are hitting our gateway.


Gateway is h.323 not MGCP.


Thanks

Steve

Correct Answer by Brad Martin about 6 years 10 months ago

If you have a pri circuit "debug isdn q931" will show active calls. If not "debug voip ccapi inout" will get you plenty of info on inbound calls.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Brad Martin Wed, 09/22/2010 - 06:13
User Badges:
  • Bronze, 100 points or more

If you have a pri circuit "debug isdn q931" will show active calls. If not "debug voip ccapi inout" will get you plenty of info on inbound calls.

Actions

This Discussion